Appropriate control measure design by rapidly identifying risk areas of volatile organic compounds during the remediation excavation at an organic contaminated site.

Many organic contaminated sites require on-site remediation; excavation remediation processes can release many volatile organic compounds (VOCs) which are key atmospheric pollutants. It is therefore important to rapidly identify VOCs during excavation and map their risk areas for human health protection. In this study, we developed a rapid analysis and assessment method, aiming to and reveal the real-time distribution of VOCs, evaluate their human health risks by quantitative models, and design appropriate control measures. Through on-site diagonal distribution sampling and analysis, VOCs concentration showed a decreasing trend within 5 m from the excavation point and then increased after 5 m with the increase in distance from the excavation point (p < 0.05). The concentrations of VOCs near the dominant wind direction were higher than the concentrations of surrounding pollutants. In contrast with conventional solid-phase adsorption (SPA) and thermal desorption gas chromatography-mass spectrometry (TD-GC/MS) methods for determining the composition and concentration of VOCs, the rapid measurement of VOCs by photo-ionization detector (PID) fitted well with the chemical analysis and modeling assessment of cancer/non-cancer risk. The targeting area was assessed as mild-risk (PID < 10 ppm), moderate-risk (PID from 10 to 40 ppm), and heavy-risk (PID > 40 ppm) areas. Similarly, the human health risks also decreased gradually with the distance from the excavation point, with the main risk area located in the dominant wind direction. The results of rapid PID assessment were comparable to conventional risk evaluation, demonstrating its feasibility in rapidly identifying VOCs releases and assessing the human health risks. This study also suggested appropriate control measures that are important guidance for personal protection during the remediation excavation process.